How to Clean Your Headphone Jack Without Damaging Your Phone

Cleaning the headphone jack on your phone may be the last thing on your to do list, and rarely. But the reality is that your phone costs a ton of money stuck in your pocket or your purse, where things like dirt, dust, and other untold debris can quickly gather. Since it is an open port, it is not protected at all, even if your phone is a heavy-duty case. Fortunately, it is very easy to clean your headphone jack using devices that you already have at home.

How do you know if your headphone jack is dirty? Most of the time you can tell it completely by looking at it. But a clogged headphone jack can cause a lot of sound issues, such as skipping, static and low sound. If you are facing any of these problems, or if you want to completely clean your entire phone (it is) One of the disinfected things After all!), Keep reading for our three different headphone jack cleaning methods. For more phone cleaning tips, check out how experts say you should clean your phone to prevent coronavirus spread.

How to use compressed air to clean your headphone jack.


Compressed air in a can – the way you scrub dust from your keyboard – is the safest way to easily remove debris from your headphone jack. Strong pressures in space can cause explosions, creating and removing dust from the most part of the space. Compressed air is often sold in computer, electronics, and office supply stores. For more recommendations that will make your life easier, check out 17 Best Cleaning Products to Keep Your Home New.

Step 1: Remove any packaging from the can.

Some can include a plastic tab to prevent accidental discharge of air during transport.

Step 2: Objective.

Aim the nozzle directly at your headphone jack.

Step 3: Spray into Jack.

Press the button to blast the dirt, dust and lint from the jack.

How to use cotton swap to clean your headphone jack.

Closeup of multicolored cotton swab.

The best thing about this method is that it requires only one common household item: a cotton swab. One minor drawback is that cotton can get stuck in your headphone jack, leaving you with a bigger problem than when you started. Follow these steps carefully to clean your headphone jack without going.

Step 1: Cut the swab.

Using an extremely sharp pair of scissors, carefully rub the cotton at a slight angle to each edge of the tip. The top should come to a point, but again, only very slightly. Too much cutting will result in cotton becoming loose and possibly unpolished.

Step 2: Wet the broom.

Wet your newly chopped cotton swab slightly with water or rubbing alcohol. It should not be dripping wet, just slightly damp so as not to ruin the metal inside the jack.

Step 3: Insert the swab into the jack.

Carefully insert the cotton swab into the jack and make a circular motion to clean the debris around the inside of the jack.

Step 4: Dry the jack.

Remove the broom and repeat with a dry to remove any excess moisture.

How to use a paper clip to clean your headphone jack.

Straight paper clip

An untold paper clip is the right size for this job. So if yours seems beyond repair, try this method. Just use caution – if you are too fat the clip can damage the metal. For more miracle cleaning advice, check out 27 amazing cleaning tips you’ll know soon.

Step 1: Unfold your paper clip.

Make sure it is as straightforward as you can get it.

Step 2: Wrap it with tape.

Wrap a piece of tape around the end of the paper clip – the sticky side.

Step 3: Clean your jack carefully.

Insert the clip into your headphone jack and gently move it in a circular motion to remove dirt from all sides of the interior.

Back to top button